Specialising in custom-designed, precision scientific instruments, built, programmed and calibrated to the most exacting standards. The range includes precision dataloging barographs, with built-in statistical analysis, Barographic Transient Event Recorders and computer-interfaced detectors and sensors for environmental monitoring & process control.
A site dedicated to scientific techniques, experimental methods, & investigative tools for the inventor, researcher and laboratory pioneer. Articles on glassblowing, electronics, metalcasting, magnetic measurements with new material added continually. Check it out! www.drkfs.net
click on any item in the list for its wikipedia entry if available.
In secondary ion mass spectrometry the excitation beam that produces the ionization consists of a stream of ions having a kinetic energy in the kilo-electron volt range that are generated in a specially designed ion-gun. Those most commonly used ions are the Ar+, O2+ and Cs+ ions. If the sample, or sample support, is conducting (i.e. a metal) then the charge received by the target can leak away. If, however, the target is not conducting, an electric charge can build up on the sample surface and interfere with the focusing of the ions that are produced. Flooding the sample with low–energy electrons from a separate electron source, can eliminate this charge that is built up. Abundant molecular ions are usually formed by the secondary ion process, such as (M+H)+ and (M+Ag)+, from thin layers of sample deposited on a metal substrate such as silver . The use of other materials as a substrate, such as nitrocellulose , can improve the ionization efficiency for very high molecular weight samples.
About the Author
RAYMOND PETER WILLIAM SCOTT was born on June 20 1924 in Erith, Kent, UK. He studied at the University of London, obtaining his B.Sc. degree in 1946 and his D.Sc. degree in 1960. After spending more than a decade at Benzole Producers, Ltd. Where he became head of the Physical Chemistry Laboratory, he moved to Unilever Research Laboratories as Manager of their Physical Chemistry department. In 1969 he became Director of Physical Chemistry at Hoffmann-La Roche, Nutley, NJ, U.S.A. and subsequently accepted the position of Director of the Applied Research Department at the Perkin-Elmer Corporation, Norwalk, CT, U.S.A.
In 1986 he became an independent consultant and was appointed Visiting Professor at Georgetown
University, Washington, DC, U.S.A. and at Berkbeck College of the University of London; in 1986 he retired but continues to write technical books dealing with various aspects of physical chemistry and physical chemical techniques. Dr. Scott has authored or co-authored over 200 peer reviewed scientific papers and authored, co-authored or edited over thirty books on various aspects of physical and analytical chemistry. Dr. Scott was a founding member of the British chromatography Society and received the American Chemical society Award in chromatography (1977), the M. S. Tswett chromatography Medal (1978), the Tswett chromatography Medal U.S.S.R., (1979), the A. J. P. Martin chromatography Award (1982) and the Royal Society of Chemistry Award in Analysis and Instrumentation (1988).
Dr. Scott’s activities in gas chromatography started at the inception of the technique, inventing the Heat of Combustion Detector (the precursor of the Flame Ionization Detector), pioneered work on high sensitivity detectors, high efficiency columns and presented fundamental treatments of the relationship between the theory and practice of the technique. He established the viability of the moving bed continuous preparative gas chromatography, examined both theoretically and experimentally those factors that controlled dispersion in packed beds and helped establish the gas chromatograph as a process monitoring instrument. Dr. Scott took and active part in the renaissance of liquid chromatography, was involved in the development of high performance liquid chromatography and invented the wire transport detector. He invented the liquid chromatography mass spectrometry transport interface, introduced micro-bore liquid chromatography columns and used them to provide columns of 750,000 theoretical plates and liquid chromatography separations in less than a second. Dr. Scott has always been a “hands-on” scientist with a remarkable record of accomplishments in chromatography ranging from hardware design to the development of fundamental theory. He has never shied away from questioning “conventional wisdom” and his original approach to problems has often produced significant breakthroughs.